聯系我們
-
濟南中陽石磨電器有限公司
- 聯系:和經理
- 電話:17116125111
- 手機:17116125111
- 郵箱:3471464452@qq.com
- 網址:http://www.115701.com
- 廠址:山東省濟南市章丘區相公莊鎮
影響石磨制粉設備產量的原因有哪些?
來源:http://www.115701.com/發布時間:2021-09-17
石磨制粉設備的產量關系到石磨制粉設備用戶的經濟效益,所以大家都渴望石磨制粉設備的產量達到一定的數量,所以由于配料的不同,很多石磨制粉設備的產量都會不符合標準,這是什么原因
石磨制粉設備的產量關系到石磨制粉設備用戶的經濟效益,所以大家都渴望石磨制粉設備的產量達到一定的數量,所以由于配料的不同,很多石磨制粉設備的產量都會不符合標準,這是什么原因造成的?在這種情況下我們應該怎么做?
The output of stone mill pulverizing equipment is related to the economic benefits of stone mill pulverizing equipment users, so everyone is eager for the output of stone mill pulverizing equipment to reach a certain quantity. Therefore, due to different ingredients, the output of many stone mill pulverizing equipment will not meet the standard. What is the reason? What should we do in this case?
如果石磨制粉設備的產量太低,檢查下面的石磨制粉設備的磨輥是否會出現異常。如果磨輥出現異常,那么就要考慮以下幾個因素
If the output of the stone mill pulverizing equipment is too low, first check whether the grinding roller of the following stone mill pulverizing equipment will be abnormal. If the grinding roller is abnormal, the following factors should be considered
①石磨制粉設備研磨物料的容量。小麥逐步磨碎后,隨著胚乳下垂和刮削,物料的容重隨著磨皮次數的推回而降低,粉碎機的單位流量也隨之降低。
① Capacity of grinding materials of stone mill pulverizing equipment. After the wheat is gradually ground, with the endosperm sagging and scraping, the bulk density of the material decreases with the pushing back of the grinding times, and the unit flow of the crusher also decreases.
②石磨制粉設備磨齒高度。在磨削過程中,由于磨齒下垂磨損,磨齒難以抓住物料,磨輥表面的滑動增大,即物料在磨削區的移動速度加快減少。并且由于磨齒高度降低,兩磨齒間隙中的物料減少,從而使平面磨床的產量降低。
② Grinding gear height of stone mill pulverizing equipment. In the grinding process, due to the sagging wear of the grinding teeth, it is difficult for the grinding teeth to grasp the material, and the sliding of the grinding roller surface increases, that is, the moving speed of the material in the grinding area increases and decreases. And because the grinding height is reduced, the material in the gap between the two grinding teeth is reduced, so that the output of the plane grinder is reduced.
相關新聞
- 提高香油石磨機的出油率有方法2022-05-30
- 石磨豆?jié){機特點優點相關內容介紹2022-05-29
- 面粉石磨機保證加工制品的純度方法2022-05-29
- 芝麻醬石磨機的四步使用方法2022-05-27
相關產品